Martel Electronics BetaGauge 301 - Manual (Page 8)

Table 4 Mode Concurrency
CURRENT DISPLAY
P[1] [EXT] P[1] [EXT] mA mA Volts
ST ST Loop
P[1]
[EXT]
P[1]ST X X X X X
[EXT]ST X X X X X
mA X X X X
mA Loop X X X X
Volts X X X X
6
With a single display the following modes are available:
P[1] = Pressure on left side sensor.
[EXT] = Pressure with external pressure module.
P[1] ST = Switch Test with left side sensor.
[EXT] ST = Switch Test with external pressure module.
mA = Milliamps measure without loop power.
mA LOOP = Milliamps measure with loop power.
VOLTS = Voltage Measure.
The following table shows which functions are available concurrently.
An X in a column indicates that the mode in the current display will not be available for
selection if the mode in that row is in use in any other active display.
OTHER DISPLA
YS
2.1.1.3 Accessing Other Menus
Use the MORE option on the Main Menu to access the other menu functions.