KYORITSU 3132A - Manual (Page 18)

9.Cleaning of the Instrument
◎ Cleaning the meter cover
This tester is managed by our company's quality standard and is delivered
in the best condition after passed the inspection. But in the dry time of
winter static electricity sometimes builds up on the meter cover due to the
characteristic of plastic.
When the pointer deflects by touching the surface of this tester or zero
adjustment can not be made, do not try to make measurement.
When static electricity builds up on the meter cover and affects the meter
reading, use a cloth dampened with off-the-shelf anti-statics agent or
detergent to wipe the meter cover surface.
10.Service
If this tester should fail to operate correctly, return it to your nearest
distributors stating the exact nature of the fault.
Before returning the unit, make sure that:
a) Operating instructions have been followed
b) Leads have been inspected
c) Fuse has been checked
d) Battery has been checked
e) The unit is returned with all accessory leads
Remember, the more information written about the fault, the quicker it will be
serviced.
― 17 ― ― 16 ―
8.Notes on Accessories
8-1 Case Lid
The case can be fitted under the housing case as illustrated bellow.
① Open the case lid as shown. ② Turn it 180 degrees.
③ Put the case lid under ④Hook it on the housing case.
the housing case.
8-2 How to fit Neck Strap & Test Probe Pouch
3132A-E/03-08 03.8.6 10:33 AM ページ 16