AudioBahn Tray Loaded Multi-Format DVD Player AVDVD10P - Manual (Page 18)

Advanced Setup
DOWNMIX
MAIN PAGE
SPEAKER SETUP PAGE
3. GENERAL PAGE
LT/RT:
STEREO:
Sends the Left and Right channels of the 5.1 channel
surround mix to the main left and right outputs.
Stereo remixes all of the main channels to the two stereo
channels.
SPDIF OUTPUT
DUAL MONO
COMPERESSION
LPCM OUTPUT
MAIN PAGE
AUDIO SETUP
4.AUDIO SETUP
Select the input and output formats, SPDIF OUTPUT
setting, and Compression options.
SPDIF OUTPUT:
DUAL MONO:
The normal setting is STEREO.
L-MONO:
R-MONO:
MIX-MONO:
COMPRESSION:
Leave on Analog (default) to use the conventional 5.1 output.
Set to SPDIF/RAW to use the coaxial output to feed an exter-
nal Dolby Digital or DTS surround processor.
Set to SPDIF/PCM (Linear Pulse code Modulation) to feed
an outboard stereo D to A converter Stereo-only digital input.
sends only the left channel signal to both Left and
Right output channels.
sends only the right channel output to both chann-
nels. These two selections are useful for some VCDs which
may have one language on each channel in mono.
mixes both left and right channnels, sending
the resulting mono mix to both output channels. Use this when
you are using a mono speaker/amplifier system, or older TV
with a single speaker.
Controls the amount of dynamic range compression from
FULL compression to no compression (OFF). You may freely
adjust this to your taste.
Lets you set the optical digital output sampling rate to 48KHz
(default) or 96KHz.
LPCM OUTPUT: