KROHNE BM 500 EN - Manual (Page 5)

SAFETY INSTRUCTIONS
1
5
BM 500
www.krohne.com 12/2013 - 4003176301 - MA BM 500 R02 en
1.1 Intended use
The potentiometric level meter BM 500 BM 500 BM 500 BM 500 is designed solely for measuring continuously the level of
liquids and pasty and sticky products.
The device is particularly suitable for measuring low levels in the range of 50...1000 mm /
2...39.4". Thanks to the principle involved, this potentiometric measuring system is independent
of sticky deposits and varying product properties. All it needs is a minimum conductivity of
50 µS/cm.
1.2 Certifications
The device fulfils the statutory requirements of the following EC directives:
• EMC specification acc. to EN 61326-1 (2006)
The manufacturer certifies successful testing of the product by applying the CE marking.
CAUTION!
Responsibility for the use of the measuring devices with regard to suitability, intended use and
corrosion resistance of the used materials against the measured fluid lies solely with the
operator.
INFORMATION!
The manufacturer is not liable for any damage resulting from improper use or use for other than
the intended purpose.
CE marking