KROHNE OPTIGAS 4010 C EN - Manual (Page 10)

3
INSTALLATION
10
OPTIGAS 4010C
www.krohne.com 07/2014 - 4002962702 - MA OPTIGAS R02 en
Mounting positions
1 Avoid mounting the meter with the flow running uphill because it can cause liquid to build up on the supply side of the
meter.
2 Mount the meter with the flow running downhill. This will allow any build up of liquid to drain from the meter.
3 Avoid mounting the meter with the connection box above the meter. This can cause liquid to collect in the measuring
tubes at their lowest point in the meter.
4 Mount the meter with the junction box underneath the meter. This will prevent liquid from collecting in the measuring
tubes.
5 The meter can be mounted vertically but DO NOT mount it so that the flow is uphill. This can cause fluid to build up on
the supply side of the meter.
6 If you are mounting the meter vertically, mount it so that the flow is downhill. This will allow any build up of fluid to
drain from the meter.
MA_OPTIGAS_4010C_en_140722_4002962702_R02.book Page 10 Tuesday, July 22, 2014 4:30 PM