KROHNE GA 24 EN - Manual (Page 16)

5
SERVICE
16
GA24
www.krohne.com 02/2011 - 4001229901 MA GA24 R01 en
Service
5.1 Maintenance
The flowmeter should be checked for signs of dirt, corrosion, mechanical wear and damage to
the measuring glass during routine maintenance of the system and pipelines. We advise that
inspections be carried out at least once per year.
5.2 Spare parts availability
The manufacturer adheres to the basic principle that functionally adequate spare parts for each
device or each important accessory part will be kept available for a period of 3 years after
delivery of the last production run for the device.
This regulation only applies to spare parts which are subject to wear and tear under normal
operating conditions.
5.3 Availability of services
The manufacturer offers a range of services to support the customer after expiration of the
warranty. These include repair, maintenance, technical support and training.
CAUTION!
Pressurized pipes have to be depressurized before removing the device.
Empty pipes as completely as possible.
In the case of devices used for measuring aggressive or hazardous media, appropriate safety
precautions must be taken with regard to residual liquids in the measuring unit.
Only the connecting couplings of the pipeline may be undone.
Always use new seals when fitting the measuring device in the pipe.
Avoid electrostatic charges when cleaning the surfaces (e.g. sight window)!
Test the leak tightness using suitable means prior to starting up the measuring device again.
INFORMATION!
For more precise information, please contact your local representative.
MA_GA24_R01_en_4001229901_PRT.book Page 16 Wednesday, February 2, 2011 8:57 AM