KROHNE OPTIFLEX 1300 IECEx - Manual (Page 7)

INSTALLATION
2
7
OPTIFLEX 1300 C
www.krohne.com 09/2010 - 4000176402 - AD IECEX OPTIFLEX1300 R02 en
2.1 Precautions
2.1.1 General notes
2.1.2 Electrostatic discharge
Take the necessary antistatic precautions if you:
• handle,
• install or
• use
the device in potentially explosive atmospheres. Do not install in a location (near to ventilation
systems, for example) where the electrostatic charge can increase.
WARNING!
When you install the device, obey the conditions in the IECEx approval certificate. These
conditions include:
• The special conditions for safe use.
• The Essential Health and Safety Requirements.
The certificate is given on the CD-ROM supplied with the device. You can also download the
certificate from our internet site.
DANGER!
This installation must agree with IEC 60079-14: Explosive atmospheres - Part 14: Electrical
installations design, selection and erection and IEC 61241-14: Electrical apparatus for use in the
presence of combustible dust - Part 14: Selection and installation.
DANGER!
Risk of electrostatic discharge from the blue plastic sun cover, the conduit of the remote housing
option and the optional plastic protective sheath for the single rod probe. Make sure that all
personnel and equipment are correctly grounded.
Figure 2-1: ESD warning sticker (below the device nameplate)
1 Text: Plastic Parts
2 Text: Warning! Potential electrostatic hazard - see instructions
PLASTIC PARTS
WARNING:
POTENTIAL ELECTROSTATIC HAZARD
SEE INSTRUCTIONS
!