beautypg.com

KROHNE VARIFLUX IFS 6000 EN User Manual

Page 2

background image

2

Contents

System description

2

Product liability and warranty

2

Standards and approvals

2

Items included with supply

3

1 Important information for installation: PLEASE NOTE

4-5

2 Suggestions for installation

5

3 Instrument nameplate

6

4 Flowmeter versions

6

5 Installation in the pipeline and torques

7

6 Limits

8

7 Grounding

8-9

8 Service

10

9 Spares and order numbers

10

10 Technical data

11

11 Dimensions and weights

12-14

Printed form to accompany flowmeters returned to Krohne

15

System description

VARIFLUX electromagnetic flowmeters are precision measuring instruments designed for the
linear flow measurement of process liquids.

The process liquids must be electrically conductive:

0

5

µ

S/cm

20

µ

S/cm for demineralized cold water

The full-scale range Q

100%

can be set as a function of the meter size:

DN 2.5 - 80 /

1

/

10

” - 3” Q

100%

= 0.01 - 220 m

3

/hr = 0.03 - 960 US Gal/min

This is equivalent to a flow velocity of 0.3 - 12 m/s, or 1 - 40 ft/s.

Product liability and warranty

VARIFLUX electromagnetic flowmeters are designed solely for measuring the volumetric flowrate
of electrically conductive, liquid process products.

Special codes and regulations apply to their use in hazardous locations, and these are referred to
in the special “Ex” installation and operating instructions (supplied only with hazardous-duty
equipment).

Responsibility as to suitability and intended use of these electromagnetic flowmeters rests solely
with the operator.

Improper installation and operation of the flowmeters (systems) may lead to loss of warranty.

In addition, the “General conditions of sale” forming the basis of the purchase contract are
applicable.

If VARIFLUX flowmeters need to be returned to Krohne, please note the information given on the
last-but-one page of this manual. Krohne regret that they cannot repair or check your flowmeter(s)
unless accompanied by the completed form sheet.

Standards and approvals

Please refer to the installation and operating instructions for the signal converter.