KROHNE SMARTSENS PH 8530 EN - Manual (Page 37)

DESCRIPTION OF HART INTERFACE
7
37
SMARTSENS PH 8530
www.krohne.com 11/2013 - 4002544802 - MA SMARTSENS PH 8530 R02 en
7.5.2 Operation
Operating the sensor via the Field Communicator is very similar to manual device control using
the keyboard.
Limitation: The service menu parameters for the senor are supported but a simulation for the
current output is not possible.
Parameter protection for custody transfer is the same as on the SMARTMAC 200 W display.
Other specific protective functions such as the passwords for the quick setup menu and the
setup menu are not supported with HART
® .
7.6 Field Device Tool / Device Type Manager (FDT/DTM)
A Field Device Tool Container (FDT Container) is basically a PC program used to configure a field
device via HART
® . To adapt to different devices, the FDT container uses a so-called Device Type
Manager (DTM).
7.6.1 Installation
If the DTM for the sensor has not yet been installed on the FDT Container, setup is required and
is available for download from the website or on CD-ROM. See the supplied documentation for
information on how to install and set up the DTM.
INFORMATION!
For more detailed information (see on page 38), Menu tree for Basic DD.
.book Page 37 Monday, November 18, 2013 4:32 PM