KROHNE OPTIWAVE 5200 C_F Quickstart EN - Manual (Page 16)

2
INSTALLATION
16
OPTIWAVE 5200 C/F
www.krohne.com 08/2013 - 4001905202 - QS OPTIWAVE 5200 R02 en
2.7.4 Standpipes (stilling wells and bypass chambers)
Use a standpipe if:
• There is highly conductive foam in the tank.
• The liquid is very turbulent or agitated.
• There are too many other objects in the tank.
• The device is measuring a liquid (petro-chemicals) in a tank with a floating roof.
• The device is installed in a horizontal cylindrical tank (refer to the end of this section)
For more data, refer to the Handbook.
2.7.5 Wall support for the remote version
Figure 2-19: Installation recommendations for standpipes (stilling wells and bypass chambers)
1 A stilling well solution
2 A bypass chamber solution
3 Air circulation hole
4 Level of the liquid
Figure 2-20: Wall support for the remote version (attached to the remote converter)