KROHNE OPTIMASS Sensors Concentration Measurement EN - Manual (Page 12)

3
CONCENTRATION MEASUREMENT
12
OPTIMASS
www.krohne.com 01/2014 - 4000733002 - AD OPTIMASS Concentration R04
Converter settings where Product B is water Converter settings where Product B is water Converter settings where Product B is water Converter settings where Product B is water
Converter settings where Product B is not water Converter settings where Product B is not water Converter settings where Product B is not water Converter settings where Product B is not water
To produce the required concentration coefficiants, enter the density of the product at a number
of temperatures points. The minimum number of points required is two and the maximum is five.
For more information regarding generating concentration coefficients, refer to the Practical
considerations chapter.
No Function Setting Comments
C2.x.1 Conc Function % Mass or % Volume
C2.x.2 Conc Offset 0 If the concentration
measurement produces a stable
error, use this menu option to
enter an offset that will correct
the error.
C2.x.3 Conc Product % of Product A or % of Product B Select required product to be
measured
C2.y.1 CCF01 Linear
C2.y.2 CCF02 Density Product A (Solid) in
g/cm
3
C2.y.3 CCF03 0 No change with temperature
C2.y.4 CCF04 0
C2.y.5 CCF05 Pure Water or Town Water
No Function Setting Comments
C2.x.1 Conc Function % Mass or % Volume
C2.x.2 Conc Offset 0 If the concentration
measurement produces a stable
error, use this menu option to
enter an offset that will correct
the error.
C2.x.3 Conc Product % of Product A or % of Product B Select required product to be
measured
C2.y.1 CCF01 Linear
C2.y.2 CCF02 Density Product A (Solid) in g
/cm
3
C2.y.3 CCF03 0 No change with temperature
C2.y.4 CCF04 0
C2.y.5 CCF05 Other
C2.y.6 CCF06 Density Product B in g /cm 3
C2.y.7 CCF07 Product B Temperature term
C2.y.8 CCF08 Product B Temperature squared
term
AD_Concentration_en_140124_4000733002_R04.book Page 12 Tuesday, January 28, 2014 9:28 AM