beautypg.com

Maintenance and service, 1 field version – KROHNE OPTISONIC 3400 CSA EN User Manual

Page 28

background image

5

MAINTENANCE AND SERVICE

28

OPTISONIC 3400

www.krohne.com

10/2013 - 7313222100 - AD CSA OPTISONIC 3400 -en- R01

5.4.1 Field version

Perform the following procedures:

• Unscrew the display cover of the electronics compartment by hand, by turning it counter

clockwise 1.

• Remove the display by using two screwdrivers 2.
• Unscrew the two M4 screws 3 at the electronics unit 4.
• Pull the two metal pullers 5 at the left and right of the display, using a screwdriver or similar

tool and partially pull out the electronics unit.

DANGER!
All work on the electrical connections may only be carried out with the power disconnected. Take
note of the voltage data on the nameplate!

Figure 5-1: Unscrew the cover and remove the display

Figure 5-2: Pull off printed circuit board

CAUTION!
Please pay attention that the same amount of force is applied on both pullers, otherwise the
connector at the backside can be damaged.