KROHNE IFC 050 Converter Modbus EN - Manual (Page 3)

IMPORTANT INFORMATION
1
3
IFC 050
www.krohne.com 09/2012 - 4002202601 - AD Modbus IFC 050 R01 en
The flow converter with the RS485 interface, is able to communicate with an external device (PC
or other suitable computer system) using the Modbus protocol. This option allows data exchange
between PC or computer and single or multiple devices.
The bus configuration consists of one external device as a master and one or more converters as
slaves. For bus operation the device address (menu C5.1), baudrate (menu C5.2) and settings
(menu C5.3, C5.4, C5.5 & C5.6) must be set in the signal converter.
All devices connected to the bus, must have different unique addresses but the same baud rate
and settings.