KROHNE WATERFLUX 3070 Quickstart EN - Manual (Page 22)

3
ELECTRICAL CONNECTIONS
22
WATERFLUX 3070
www.krohne.com 06/2013 - 4002400602 - QS WATERFLUX 3070 R05 en
3.3 Connection of the signal cable
3.3.1 IP 67 housing (field version)
Dimensions of cable
CAUTION!
To ensure smooth functioning, always use the signal cables included in the delivery.
INFORMATION!
The signal cable is only used for remote versions. The standard WSC-cable includes both
electrode and field current leads.
Figure 3-2: Preparation of standard cable (both sides)
1 Shielding
2 Blue + green + yellow cable, used for field current (terminals 7, 8, 9)
3 Brown + white + violet cable, used for electrode signals (terminals 1, 2, 3)
4 Drain wires
a b c d e f
mm 75 35 70 5 45 30
inch 3.0 1.4 2.8 0.2 1.8 1.2
Figure 3-3: Cable connection at sensor side, standard cable
1 Connect drain wires under screw
2 Connect shielding under clamp