KROHNE WATERFLUX 3070 Quickstart EN - Manual (Page 20)

2
INSTALLATION
20
WATERFLUX 3070
www.krohne.com 06/2013 - 4002400602 - QS WATERFLUX 3070 R05 en
2.10 Mounting of the signal converter
2.10.1 IP67 housing, remote version
Pipe mounting Pipe mounting Pipe mounting Pipe mounting
1 Fix the signal converter to the pipe.
2 Fasten the signal converter using standard U-bolts and washers.
3 Tighten the nuts.
Wall mounting Wall mounting Wall mounting Wall mounting
No special requirements.
2.10.2 IP68 housing, compact version
• Before closing the case of the converter, ensure that all surfaces in contact with the seals are
clean.
• Position the upper part of the case and tighten the lock ring.
• Use the wrench to tighten the ring as shown.
INFORMATION!
Assembly materials and tools are not part of the delivery. Use the assembly materials and tools
in compliance with the applicable occupational health and safety directives.
Figure 2-20: Pipe mounting of the field housing
Figure 2-21: Closing of IP68 housing