Safety instructions, 1 intended use, 2 certification – KROHNE WATERFLUX 3000 EN User Manual
Page 5
SAFETY INSTRUCTIONS
1
5
WATERFLUX 3000
www.krohne.com
06/2013 - 400162663 - HB WATERFLUX 3000 R04 en
1.1 Intended use
This electromagnetic flowmeter is designed exclusively to measure the flow of drinking water,
raw water and irrigation water.
1.2 Certification
The device fulfils the statutory requirements of the following EC directives:
• EMC Directive 2004/108/EC in conjunction with EN 61326-1: 2006
• Low Voltage Directive 2006/95/EC in conjunction with EN 61010-1: 2001
The manufacturer certifies successful testing of the product by applying the CE marking.
CAUTION!
Responsibility for the use of the measuring devices with regard to suitability, intended use and
corrosion resistance of the used materials against the measured fluid lies solely with the
operator.
INFORMATION!
The manufacturer is not liable for any damage resulting from improper use or use for other than
the intended purpose.
WARNING!
If the device is not used according to the operating conditions (refer to chapter Technical data),
the intended protection could be affected.
CE marking