KROHNE WATERFLUX 3000 EN - Manual (Page 27)

TECHNICAL DATA
6
27
WATERFLUX 3000
www.krohne.com 06/2013 - 400162663 - HB WATERFLUX 3000 R04 en
Operating conditions
Temperature Temperature Temperature Temperature
Process temperature -5...+70°C / +23...+158°F
Ambient temperature Standard Standard Standard Standard (with aluminium converter housing):
-40…+65°C / -40…+149°F
Protect electronics against self-heating at ambient temperatures above
55°C / 130°F
Option Option Option Option (with stainless steel converter housing):
-40…+55°C / -40…+130°F
Storage temperature -50…+70°C / -58…+158°F
Measurement range Measurement range Measurement range Measurement range -12...+12 m/s / -40...+40 ft/s
Pressure Pressure Pressure Pressure
Operating pressure Up to 16 bar / 232 psi for DN25...300
Up to 10 bar / 145 psi for DN350...600
Vacuum load 0 mbar / 0 psi absolute
Pressure loss For detailed information refer to Pressure loss on page 38.
Chemical properties Chemical properties Chemical properties Chemical properties
Physical condition Water: drinking water, raw water, irrigation water.
For salt water please contact the factory.
Electrical conductivity ≥ 20 μS/cm
Installation conditions
Installation Assure that the flow sensor is always fully filled.
For detailed information refer to Installation on page 12.
Flow direction Forward and reverse
Arrow on flow sensor indicates forward flow direction.
Inlet run DN25...300:≥ 0 DN
DN350...600:≥ 3 DN
For detailed information refer to Measurement accuracy on page 33.
Outlet run DN25...300:≥ 0 DN
DN350...600:≥ 1 DN
For detailed information refer to Measurement accuracy on page 33.
Dimensions and weights For detailed information refer to Dimensions and weights on page 35.