KROHNE TIDALFLUX 2300 F Quickstart EN - Manual (Page 5)

INSTALLATION
2
5
TIDALFLUX 2300 F
www.krohne.com 06/2013 - 4002489402 - QS TIDALFLUX 2300 R02 en
• Store the device in its original packaging.
• Storage temperature: -50 ...+70°C / -58...+158°F
2.5 Transport
2.6 Pre-installation requirements
Make sure that you have all necessary tools available:
• Allen key (4 mm)
• Small screwdriver
• Wrench for cable glands
• Wrench for wall mounting bracket (remote version only)
• Torque wrench for installing flowmeter in pipeline
2.7 General requirements
Figure 2-3: Transport
INFORMATION!
The following precautions must be taken to ensure reliable installation.
• Make sure that there is adequate space to the sides.
• Protect the signal converter from direct sunlight and install a sun shade if necessary.
• Signal converters installed in control cabinets require adequate cooling, e.g. by fan or heat
exchanger.
• Do not expose the signal converter to intense vibration. The flowmeters are tested for a
vibration level in accordance with IEC 68-2-64.
2.4 Storage
• Store the device in a dry and dust-free location.
• Avoid lasting direct exposure to the sun.