KEPCO RA 79 - Manual

©2007, KEPCO, INC 1
Data subject to change without notice 228-1619
I N S T R U C T I O N S H E E T
RA 79
KEPCO
KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11352 U.S.A. " TEL (718) 461-7000 " FAX (718) 767-1102
http://www.kepcopower.com " email: [email protected]
An ISO 9001 Company.
MODEL RA 79
RACK ADAPTER
DESCRIPTION (Refer to Figure 1)
The Kepco Model RA 79 RACK ADAPTER is designed for the installation of Kepco Power Assemblies into a standard 19-inch
(482.6mm) rack. The Rack Adapter occupies 7.00 inches (177.80 mm) of vertical space in the standard 19-inch equipment rack
and is 24-inches (609.60 mm) deep. Mechanical dimensions, material and finish of the Kepco Model RA 79 Rack Adapter are
provided in Figure 2.
The Rack Adapter may be mounted fixed or may be equipped with optional slides. The unit comes fitted with bracket spacers
(shim bars for equipment slides), four rubber feet, a “U” shaped removable cover with fourteen mounting screws, Rack Adapter
handles and Mounting Ears. Rack Adapter RA 79 was developed to provide mounting space for a multitude of Kepco’s linear
and switching power supplies. The Rack Adapter may be equipped with a variety of front panel and rear panel components to
form a complete rack mounted power assembly, designed by the user.
The rack adapter is shipped with front panel for the lower half of unit installed. These are chosen by the customer from the
selection below. If no preference is indicated, the unit is shipped with the front Full Rack Vented panel installed. Details
about all available power supplies, panel components and accessories to be used with RA 79 Rack Adapter may be found in
Kepco’s Power Supplies Catalog, “Power Assemblies” Section. It is available from your Kepco Representative, or directly from
Kepco, Inc., 131-38 Sanford Avenue, Flushing, N.Y. 11352, USA, or on our web site at:
www.kepcopower.com/custompa.htm
FIGURE 1. RA 79 RACK ADAPTER ASSEMBLY
FRONT PANELS
MODEL KEPCO P/N DESCRIPTION
FFP-A 131-0820 FRONT PANEL, FULL RACK, VENTED
FFP-B 131-0782 FRONT PANEL, FULL RACK, SOLID