KEPCO RA 78 - Manual

2007, KEPCO, INC 1
ata subject to change without notice 228-1611
I N S T R U C T I O N S H E E T
RA 78
KEPCO
KEPCO, INC. G 131-38 SANFORD AVENUE G FLUSHING, NY. 11352 U.S.A. G TEL (718) 461-7000 G FAX (718) 767-1102
http://www.kepcopower.com G email: [email protected]
An ISO 9001 Company.
MODEL RA 78
RACK ADAPTER
DESCRIPTION (Refer to Figure 1)
The Kepco Model RA 78 RACK ADAPTER is designed for the installation of Kepco Power Assemblies into a standard 19-inch
(482.6mm) rack. The Rack Adapter occupies 8.75 inches (222.25 mm) of vertical space in the standard 19-inch equipment rack
and is 16-inches (406.4mm) deep. Mechanical dimensions, material and finish of the Kepco Model RA 78 Rack Adapter are pro
vided in Figure 2.
The Rack Adapter may be mounted fixed or may be equipped with optional slides. The unit comes fitted with bracket spacers
(shim bars for equipment slides), four rubber feet, a “U” shaped removable cover with twelve mounting screws, Rack Adapte
handles and Mounting Ears. Rack Adapter RA 78 was developed to provide mounting space for a multitude of Kepco’s linea
and switching power supplies. The Rack Adapter may be equipped with a variety of front panel and rear panel components to
form a complete rack mounted power assembly, designed by the user.
The rack adapter is shipped with front and rear panels for the lower half of unit installed. These are chosen by the customer from
the selection below. If no preference is indicated, the unit is shipped with the front and rear Full Rack Vented panels
installed. Details about all available power supplies, panel components and accessories to be used with RA 78 Rack Adapte
may be found in Kepco’s Power Supplies Catalog, “Power Assemblies” Section. It is available from your Kepco Representative
or directly from Kepco, Inc., 131-38 Sanford Avenue, Flushing, N.Y. 11352, USA, or on our web site at:
www.kepcopower.com/custompa.htm
FIGURE 1. RA 78 RACK ADAPTER ASSEMBLY
FRONT PANELS REAR PANELS
MODEL KEPCO P/N DESCRIPTION MODEL KEPCO P/N DESCRIPTION
FFP-4A47 131-0921 FRONT PANEL, 1/2 RACK, VENTED RFP-4A47 131-0915 REAR PANEL, 1/2 RACK, VENTED
FFP-4B47 131-0922 FRONT PANEL, 1/2 RACK, SOLID RFP-4B47 131-0910 REAR PANEL, 1/2 RACK, SOLID
FFP-8A47 131-0912 FRONT PANEL, FULL RACK, VENTED RFP-8A47 131-0913 REAR PANEL, FULL RACK, VENTED
FFP-8B47 131-0911 FRONT PANEL, FULL RACK, SOLID RFP-8B47 131-0914 REAR PANEL, FULL RACK, SOLID