KEPCO MA FAW/RTW 150V - Manual

©2008, KEPCO, INC
Data subject to change without notice
228-1651 REV 1 060508
I N S T R U C T I O N S H E E T
KEPCO
KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11355 U.S.A. " TEL (718) 461-7000 " FAX (718) 767-1102
http://www.kepcopower.com " email: [email protected]
An ISO 9001 Company.
MA
150V
FAW/RTW
MOUNTING ADAPTER FAW/RTW 150V
DESCRIPTION. The RoHS-compliant Model MA FAW/RTW 150V Mounting Adapter includes an adapter plate and
mounting screws that allow a 150W RTW power supply to be easily substituted for a vertically-mounted 150W FAW
power supply. Mount the adapter plate to the RTW power supply using the screws provided (see Figure 1), then
install the adapter plate in place of the FAW power supply using the screws that previously secured the FAW power
supply.
FIGURE 1. ADAPTER PLATE INSTALLATION
3043306
ADAPTER PLATE
P/N 128-2323
SEE NOTE 3.
A
RTW 150W
NOTES:
1. MOUNT ADAPTER PLATE TO RTW USING THREE SCREWS AND THREE
SPACERS AS SHOWN.
2. INSTALL ADAPTER PLATE WITH RTW ATTACHED USING "A" HOLES
AND FOUR SCREWS PREVIOUSLY USED TO MOUNT FAW POWER
SUPPLY (NOT SUPPLIED).
3. MAX. PENETRATION AT "A" (SCREW 4-40) MUST NOT EXCEED
5MM.
SPACER (3)
P/N 104-0312
(FOR M4 SCREW)
3.883
[97.36]
SEE NOTE 3.
A
7.677 [195.0]
SCREW (3)
P/N 101-0487
(M4 X 10MM ST. FLPO)