KEPCO KIT 219-0531, BHK-MG Firmware Upgrade - Manual

©2007, KEPCO, INC 1
Data subject to change without notice 228-1641
I N S T R U C T I O N M A N U A L
BHK-MG
KEPCO
KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11355 U.S.A. " TEL (718) 461-7000 " FAX (718) 767-1102
http://www.kepcopower.com " email: [email protected]
An ISO 9001 Company.
FIRWARE
UPGRADE KIT
BHK-MG FIRMWARE
UPGRADE KIT 219-0531
1. DESCRIPTION
Kepco Kit 219-0531 for BHK-MG full rack and half rack power supplies upgraded the Firmware to Version 9.01. This
upgrade provides the following enhancements: 1) Improves the dwell time accuracy when running LIST programs and
increases the allowable dwell time to 655 seconds per step, 2) improves non-volatile storage of data to protect against
corruption of data due to electrical surges (e.g., power line lightning strike). Full rack models with this upgrade provide
separate SAVE/RECALL storage locations dedicated to high and low ranges.
2. APPLICABILITY
This firmware upgrade kit is only applicable to the models/revisions listed in Table 1.
3. INSTALLATION OF COMPONENTS
3.1 MATERIAL REQUIRED (SEE TABLE 2.)
TABLE 1. APPLICABILITY
Full Rack (200W) Model Rev Half Rack (40W) Model Rev
BHK 300-0.6MG Rev 4 and above BHK 300-130MG All
BHK 500-0.4MG Rev 15 and above BHK 500-80MG All
BHK 1000-0.2MG Rev 14 and above BHK 1000-40MG All
BHK 1000-0.2MG-26069 Rev 14 and above BHK 2000-20MG All
BHK 2000-0.1MG Rev 13 and above
TABLE 2. MATERIAL REQUIRED
MATERIAL KEPCO PART NUMBER LOCATION QUANTITY
• IC, PROM A1U41 250-0684 Provided in this Kit 1
• IC, MICROPROCESSOR A1U42 250-0625 Provided in this Kit 1
• ESD (Electrostatic Discharge) wrist strap 114-0080 Provided in this Kit 1
• IC Extractor 114-0079 Provided in this Kit 1
• Phillips Screw Driver N/A Not Supplied N/A