KEPCO DIN KIT ERD-60 (P) - Manual

©1999, KEPCO, INC 1
Data subject to change without notice 228-1393
I N S T R U C T I O N M A N U A L
KIT
KEPCO
KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11352 U.S.A. " TEL (718) 461-7000 " FAX (718) 767-1102
http://www.kepcopower.com " email: [email protected]
An ISO 9001 Company.
DIN ERD
-60P
DIN-RAIL MOUNTING KIT
FOR SERIES ERD 60W
DESCRIPTION. Kepco KIT, Models DIN ERD-60P contains a mounting bracket with left and right preassembled
mounting clips and associated hardware used to install ERD Series power supplies on a DIN rail. The -60 suffix is for
the 60 Watt Series; the “P” suffix is for mounting the power supply perpendicular to the DIN rail as shown in Figure 1.
Outline Dimensions are shown in Figure 5
FIGURE 1. P SUFFIX ORIENTATION
TABLE 1. COMPONENTS SUPPLIED
KIT
MODEL NO.
MOUNTING
BRACKET
PART NO.
SCREW
(QTY 6)
(Power Supply
To Mounting
Bracket)
PART NO.
WASHER
(QTY 6)
(Power Sup-
ply To Mount-
ing Bracket)
PART NO.
CLIP
(QTY 2)
PART
NO.
CLIP
PLATE
(QTY 2)
PART NO.
SCREW
Thread-form
(QTY 4)
(Clip To
Mounting
Bracket)
PART NO.
WASHER
(QTY 4)
(Clip To
Mounting
Bracket)
PART NO.
DIN ERD-60P 128-2013
101-0383
(8-32 X 3/16
BHPH)
103-0017
(NO. 8, INT.
TOOTH)
108-0362 128-1938
101-0443
(4-40 X 1/4
BHPH)
103-0014
(NO. 4, INT.
TOOTH)