KEPCO CA 44-R - Manual

©2010, KEPCO, INC 1
Data subject to change without notice 228-1688
I N S T R U C T I O N M A N U A L
KEPCO
KEPCO, INC. 131-38 SANFORD AVENUE FLUSHING, NY. 11355 U.S.A. TEL (718) 461-7000 FAX (718) 767-1102
http://www.kepcopower.com email: [email protected]
An ISO 9001 Company.
CA 44-R
COVER ENCLOSURES AND
HARDWARE SYSTEMS
DESCRIPTION. The Kepco Model CA 44-R RoHS-compliant Cover (see Figure 1) is supplied for use with Kepco
Series RTW 150 Watt power supplies. Installing this cover changes the model suffix from K to KC. The cover
includes three M3 X 6mm screws (Kepco P/N 101-0433) used to attach the cover to the power supply as shown in
Figure 1. These screws must not be overtightened (max. torque 10 in.- lbs (1.1 N x m).
NOTE: RTW 150W power supplies with this cover installed do not have agency approvals.
FIGURE 1. CA 44-R COVER INSTALLATION
CHASSIS EDGE
CHASSIS TAB
POSITION COVER TAB
OVER CHASSIS TAB.
POSITION COVER
FLANGE OVER
CHASSIS EDGE.
3043458
REMOVE EXISTING SCREW (M3 x 8) FROM
RTW POWER SUPPLY AND USE TO SECURE
COVER TO POWER SUPPLY.
MAX TORQUE 10 1N.-LBS (1.1N x m)
CA 44-R COVER
SCREW (3), P/N 101-0433
M3 X 6MM FLP2