AT&T System 25 - Manual (Page 54)

Direct Group Calling (DGC)
❑
Your System Administrator will advise you if you have been
assigned as a member of a Direct Group Calling (DGC) group.
Calls that go to these groups are distributed among its members
for the purpose of answering incoming group associated calls.
Leaving the Group
Members may temporarily
the following
1 Listen for
2 Listen for
Returning
1 Listen for
2 Listen for
procedures:
not receive incoming calls by use of
dial tone, then press
❑❑
* 4
confirmation tone and hang up.
to the Group
dial tone, then press
❑❑
6 *
confirmation tone and hang up.
Display
The access code you dial to leave or return to the Group is
displayed on the screen until you hang up.
When receiving a DGC call, Screen 1 displays the DGC group
ID.
>522 CustServ 3
Screen 2 displays the caller identification and call-type code.
OUTSIDE g
50