AT&T System 25 - Manual (Page 30)

Incoming Calls (Continued)
Switching Between Parties
You can switch back and forth between the caller (source) and
the person you want to connect the call to (destination) by using
SOURCE
and
DEST
buttons. To move between parties:
1 Press
SOURCE
to go back to the caller.
2 Press
DEST
to go back to the called party.
3 If the called party will take the call, press RELEASE.
or
If the called party will
speak with the caller.
4 Hang up.
not take the call, press
CANCEL
and
Display
As an example: An outside person has placed a call to you and
asks to be connected to B. Taylor on extension 372. Four calls
are waiting in the attendant queue. Screen 1 has the following
information:
OUTSIDE 4
After you press
START
to send (extend) the call, Screen 1
changes; the “&” symbol indicates that the
“extend” condition is
active.
& 4
If you press
SCROLL,
Screen 2 displays information about the
person calling.
O U T S I D E &
26