Jenway 4510 - Manual (Page 16)

3.7 Results storage and display
To store the current displayed result press the STO key. The instrument display will momentarily
show STORED on the secondary display. The memory location will be given on the status display.
Up to 32 results can be stored. Each result will be stored in the next available memory location.
The instrument will store: Primary Conductivity or TDS readings
Temperature readings and the unit of measurement (°C or °F)
MAN if manual temperature measurement is used
Endpoint symbol
Selecting the RESULTS menu displays the reading stored at the displayed memory location.
451 050/REV A/03-03
The Up arrow increments the memory index, the Down arrow decrements the memory index.
The Left arrow exits to the main measurement display.
The Right arrow and STO keys do not function.
CAL/CLR deletes the current memory location. The secondary display scrolls DELETED.
To exit this mode press the ESC key.
If the memory is full the secondary display will show FULL.
13