American Dryer Corp. AD-75V - Manual (Page 10)

6
SECTION II
SPECIFICATIONS/COMPONENT IDENTIFICATION
A. SPECIFICATIONS
Gas
Electric
Steam
Shaded areas are stated in metric equivalents 9/8/03
* For non-reversing models.
** A minimum of 3/4” pipe must be supplied to the gas inlet for each dryer.
IMPORTANT: Steam dryers must be provided with clean, dry, and regulated 80 psi +/- 10 psi (5.51
bar +/- 0.69 bar) air supply.
NOTE: ADC reserves the right to make changes in specifications at any time without notice or
obligation.
BASKET (TUMBLER) DIAMETER 37” 94 cm
BASKET (TUMBLER) DEPTH 36” 91.5 cm
BASKET (TUMBLER) MOTOR 1 hp* 0.746 kw
DOOR OPENING (DIAMETER) 21-1/2” 54.6 cm
BASKET (TUMBLER) VOLUME 22.4 cu ft 0.634 cu m
DRYERS PER 20’/40’ CONTAINER 10/20
DRYERS PER 45’/48’ TRUCK 24/24
S.A.F.E. WATER CONNECTION 3/4-11.5 NH
VOLTAGE AVAILABLE 120-460v 1ш-3ш 50/60 Hz
APPROX. WEIGHT (UNCRATED) 721 lbs 327 kg
APPROX. WEIGHT (CRATED) 771 lbs 349.7 kg
HEAT INPUT 200,000 btu/hr 50,400 kcal/hr
AIRFLOW 900 cfm 25.44 cmm
INLET PIPE SIZE 3/4” F.N.P.T.**
VOLTAGE AVAILABLE 208-460v 1ш-3ш 50/60 Hz
APPROX. WEIGHT (UNCRATED) 721 lbs 327 kg
APPROX. WEIGHT (CRATED) 771 lbs 349.7 kg
AIRFLOW 1200 cfm 25.44 cmm
VOLTAGE AVAILABLE 120-460v 1ш-3ш 50/60 Hz
APPROX. WEIGHT (UNCRATED) 752 lbs 341.1 kg
APPROX. WEIGHT (CRATED) 802 lbs 363.8 kg
AIRFLOW 1200 cfm 25.44 cmm
COMPRESSED AIR VOLUME 0.75 cfh 0.02 cmh
AIR CONNECTION 1/8” F.N.P.T.
STEAM CONSUMPTION
BOILER HP
NORMAL LOAD
238.7 lbs/hr 108.3 kg/hr 7
OPERATING STEAM PRESSURE STEAM SUPPLY STEAM RETURN
125 psi max 8.6 bar 1” F.N.P.T. 1” F.N.P.T.