HT instruments HT3320 - Manual (Page 17)

HT3320
EN - 16
6.6. MAX/MIN DISPLAY
In this section it is possible to enable/disable the display of the Max and Min values of IR
temperature.
1. Use the arrow keys
S or T to select the options: Off, On (see Fig. 20)
2. Press the ESC key to save and exit the function
Fig. 20: Max/Min display activation menu
6.7. AVERAGE/DIFFERENCE DISPLAY
In this section it is possible to enable/disable the display of the Average and Difference
values of the IR temperature measured by the instrument.
1. Use the arrow keys
S or T to select the options: Off, On (see Fig. 21)
2. Press the ESC key to save and exit the function
Fig. 21: Average/Difference display activation menu
6.8. AIR / %RH TEMPERATURE DISPLAY
In this section it is possible to enable/disable the display of the air temperature values and
of the relative humidity measured by the internal sensor of the instrument.
1. Use the arrow keys
S or T to select the options: Off, On (see Fig. 22)
2. Press the ESC key to save and exit the function
Fig. 22: Air temperature/humidity display activation menu
6.9. DEW POINT / WET BULB TEMPERATURE DISPLAY
In this section it is possible to enable/disable the display of the dew point and wet bulb
temperature values measured by the instrument.
1. Use the arrow keys
S or T to select the options: Off, On (see Fig. 23)
2. Press the ESC key to save and exit the function
Fig. 23: Dew point/wet bulb temperature display activation menu