Alamo Swingtrim - Manual (Page 120)

MAINTENANCE
SWINGTRIM 03/09 Maintenance Section 5-10
© 2009 Alamo Group Inc.
MAINTENANCE
HYDRAULIC HOSES
The condition of all hoses should be checked during routine servicing. Hoses that have been chafed or
damaged on their outer casing should be securely wrapped with waterproof adhesive tape to prevent the metal
braid from rusting. Hoses that have suffered damage to the metal braid should be changed at the earliest
opportunity.
Hose Replacement
1. Replace one hose at a time to avoid the risk of wrong connections.
2. When the hose is screwed to an additional fitting or union, use a second spanner on the union to avoid
breaking both seals.
3. Do not use jointing compound on threads.
4. Avoid twisting the hose. Adjust the hose line to ensure freedom from rubbing or trapping before tightening
the hose end connections.
Hose Warranty
Warranty is limited to replacement which have failed due to faulty manufacture or materials. Warranty will not
be considered on hoses that have suffered damage by abrasion, cuts or being pinched or trapped while in
work.
Neither will a claim be considered where the hose end has been damaged by a flow or where the threads or
unions have been damaged by overtightening.