Detcon SG1 - Manual (Page 2)

1
Warranty and Repair
Detcon Inc. warrants the Model SG1 series to be free from defects in workmanship
of material under normal use and service for two years from the date of shipment.
Detcon will repair or replace the defected product during the warranty period at
no cost. However, Detcon is not responsible and will not repair or replace the
product at no cost under the following cases; the product has been purchased
through an unauthorized dealer, the product has been damaged or deformed
mechanically through user misuse, the product has not been properly calibrated or
has had parts inappropriately replaced in accordance with this operating manual.
In the event that any defect or issue with the product occurs during the warranty
period, Detcon will cover all expenses except for shipping fees. After the warranty
period expires, the expense of repair or replacement and shipping of the product
will be the responsibility of the customer. Detcon will not be responsible for any
indirect occurrence or accident and/or damage during the use of the product, and
the warranty shall be limited to the replacement of parts and product. The warranty
only applies to customers who purchased the product through Detcon and the
warranty repair is to be performed by the Detcon Service Department.
Product Information
Detcon Model SG1 is a portable single-gas detector that uses electrochemical sensor
technology to detect and monitor hydrogen sulfide, carbon monoxide, hydrogen, oxygen
and sulfur dioxide. This lightweight, compact gas detector is controlled by an advanced
microprocessor allowing for automatic zero-calibration and easy span calibration set up.
During normal operation the large backlit LCD screen continuously displays battery life
and real-time gas concentration in ppm or concentration of oxygen by percentage.
The SG1 features advanced STEL (Short Term Exposure Limit) and TWA (Time Weighted
Average) functions to prevent dangerous prolonged exposure to a specified gas.
Maximum and minimum gas concentrations can also be programmed and monitored. The
portable gas detector features an easy to use touch-button interface with simple-to-follow
display symbols. Users are alerted to hazardous conditions via three alarm functions:
vibration alert, LED alert lamp and an audible buzzer with low and high settings of up to
90 dB. Weighing just 4.6 ounces, the SG1 is housed in a sturdy rubber enclosure that is
shock resistant. It includes a heavy-duty stainless steel alligator belt clip and has a
minimum battery run time of 4,500 hours.