Detcon TP-524C - Manual (Page 18)

3.13 W ARRANTY
Detcon, Inc., as manufacturer, warrants each hydrogen sulf ide sensor element (PN 399-800000-000), for a ten year
period under the conditions described as follows: The warranty period begins on the date of shipment to the origi-
nal purchaser, and follows the schedule below. The sensor element is warranted to be free from defects in material
and workmanship. Should any sensor fail to perform in accordance with published specif ications within the warran-
ty period, return the defective part to Detcon, Inc., 4055 Technology Forest Blvd, Suite 100, The Woodlands, Texas
77381, for necessary repairs or replacement.
First year No Charge
2nd-5th years $25.00 handling charge
6th year $60.00 handling charge
7th year $96.00 handling charge
8th year $120.00 handling charge
9th year $150.00 handling charge
10th year $176.00 handling charge
Warranty voided $200.00 charge
Non-warranty $295.00 charge
Terms & Conditions
* The original serial number must be legible on each sensor element base.
* Shipping point is FOB the Detcon factory.
* Net payment is due within 30 days of invoice.
* Detcon, Inc. reserves the right to refund the original purchase price in lieu of sensor replacement.
3.14 S
ERVICE
P
OLICY
Detcon, Inc., as manufacturer, warrants under intended normal use each new MicroSafe™ plug-in control circuit to
be free from defects in material and workmanship for a period of two years from the date of shipment to the origi-
nal purchaser. Detcon, Inc., further provides for a f ive year f ixed fee service policy wherein any failed transmitter
shall be repaired or replaced as is deemed necessary by Detcon, Inc., for a f ixed fee of $65.00. The f ixed fee service
policy shall affect any factory repair for the period following the two year warranty and shall end f ive years after
expiration of the warranty. All warranties and service policies are FOB the Detcon facility located in The
Woodlands, Texas.
Detcon Model TP-524C Hydrogen Sulfide Sensor PG.18
Spash Guard
Rain Shield
Enclosure less cover
Connector Board
Calibration Adapter
Enclosure glass lens cover
Plug-in control circuit
H2S Sensor in Housing
Programming Magnet
Condensation
Prevention Packet
(replace annually)
Figure #8