0 warranty, 0 service policy, 0 revision history – Detcon DM-600IS User Manual
Page 41
DM-600IS
DM-600IS Instruction Manual
Rev 1.5.9
Page 37 of 37
18.0 WARRANTY
Detcon, Inc., as manufacturer, warrants each new electrochemical toxic gas plug-in sensor cell, for a specified
period under the conditions described as follows: The warranty period begins on the date of shipment to the
original purchaser and ends after the specified period as listed in the table in Section 4.0. The sensor cell is
warranted to be free from defects in material and workmanship. Should any sensor cell fail to perform in
accordance with published specifications within the warranty period, return the defective part to Detcon, Inc.,
4055 Technology Forest Blvd. Suite 100, The Woodlands, Texas 77381, for necessary repairs or replacement.
19.0 SERVICE POLICY
Detcon, Inc., as manufacturer, warrants under intended normal use each new DM-500IS series plug-in signal
transmitter Control Circuit and intrinsically safe Sensor Head circuit to be free from defects in material and
workmanship for a period of two years from the date of shipment to the original purchaser. Detcon, Inc.,
further provides for a five year fixed fee service policy wherein any failed signal Transmitter shall be repaired
or replaced as is deemed necessary by Detcon, Inc., for a fixed fee of $65.00. Any failed intrinsically safe
Sensor Head circuit shall be repaired or replaced as is deemed necessary by Detcon, Inc., for a fixed fee of
$55.00. The fixed fee service policy shall affect any factory repair for the period following the two year
warranty and shall end five years after expiration of the warranty. All warranties and service policies are FOB
the Detcon facility located in The Woodlands, Texas.
20.0 Revision History
Revision
Date
Changes made
Approval
1.5.6
09/12/2006
Previously issued
BM
1.5.7
08/19/2010
Calibration Adapter changed from 943-000217-5A1 to 943-
000006-132
BM
1.5.8
11/08/2010
Correction of wrong value in Cross Interference table. Value for
CO interfering with C2H3CL was 12150=100, changed to
200=100
BM
1.5.9
01/10/2013
Converted manual from Quark to MS Word. Added statement
about maximum distance of sensor separation (Section 5.5)
BM
Shipping Address 4055 Technology Forest Blvd. Suite 100,., The Woodlands Texas 77381
Mailing Address: P.O. Box 8067, The Woodlands Texas 77387-8067
Phone: 888.367.4286, 281.367.4100 • Fax: 281.292.2860 •
•