Delmhorst Instrument F-2000 User Manual
Page 7
5
TO CHECK ACCUMULATED
READINGS
This feature allows you to view the total number of all
accumulated readings, the average of those readings, and the
highest stored reading.
h
To view the statistics press and release the calibration
check key
@
. First the meter displays the number of accu-
mulated readings for one second, then the average of those
readings for two seconds. Then it displays the highest
stored reading for two seconds. The total “cycle” time is
five seconds.
h
To erase all the accumulated readings, hold the calibration
check key
@
for more than 5 seconds until the meter dis-
plays “0”.
h
To keep the accumulated readings in memory, release the
calibration check key
@
before the total cycle time is
complete.
TO RESET METER
h
Press and release the calibration check key
@
.
h
Within one second, press and hold the set-point decrease
key
#
.
h
The meter will reset itself and display “119.” This indicates
that the meter has been reset and that the set-point has
been set to its default value of 19%. It will also clear all
of the readings stored in memory.
F-2000 owners manualB&W_F-2000 owners manual out 1/11/13 11:31 AM Page 7