DeFelsko PosiTector DPM v.1.2 - Manual (Page 10)

10
RESET restores factory settings and returns the instrument to a
known, out-of-the-box condition. It is handy when you want to
“start all over”. When RESET is selected, the following screen
appears:
The following changes are made to the instrument:
- all datasets are erased from memory
- menu settings are changed to the following:
MEMORY = OFF BACKGLOW = ON
ALARM = ON FLIP LCD = Normal
A “hard” RESET can be performed when the instrument is
powered down. It is handy when the instrument fails to
power-up or operate properly. With the instrument powered
OFF: Hold the button until the RESET symbol appears.
It performs the same function as a menu RESET with the
addition of UNITS = Celsius and LANGUAGE = English.
NOTE: Time and Date are not affected by a RESET.
The Dew Point Meter has a unique glow screen that evenly
lights the LCD to provide better visibility and contrast. In
some lighting conditions this is not necessary, so the glow
can be switched off for slightly longer battery life.
This menu button displays the instrument’s model number,
serial number, probe data, revision number and the amount of
remaining memory for storage of datasets. Select NEXT to
exit.
Setup Setup Menu Option Menu Option
When SETUP is selected the following options are presented: