Catskill Craftsmen 51563 - Manual (Page 9)

STEP 9
Assemble Spice Rack
Insert retainer
rods into holes
Fasten Shelves with
1 1/4” Phillips Flat Head
#8 Screw (Bronze)
Pilot holes in shelves
go toward back
Magnet (1)
5/8” Pan Head Screw
2 Used
in this step
STEP 10
A. Stick magnet to magnet plate on an outside door.
B. With adjacent door open, close the outside door. The magnet should be positioned over the
wooden block on the bottom of the top front brace. Hold the magnet in place with your thumb, and
open the door. The magnet will be in the correct position on the block. Mark the position with a pencil.
C. Secure magnet with the two round head screws in the magnet packet. Center screws in the slot in
the magnet . This will allow adjustment later, if needed.
.
Magnet (1)
5/8” Pan Head Screw
2 Used
in this step