Catskill Craftsmen 51563 - Manual (Page 11)

STEP 14
A. Open doors and tap 1” pins into
the side panels to hold the shelves.
The middle shelf has two positions
from which to choose.
B. Insert the bottom shelf by placing
the back of shelf on back set of pins.
Close the door and the shelf will
drop into place.
C. Place the middle shelf, edge
banding out, on the pins.
Edge banding goes out
STEP 13
Install Drawer / Cutting Board
A. Upright unit and insert drawer. If drawer front hits the top front brace, tap brace down.
B. Insert the cutting board by sliding it above the drawer and over the cutting board rails.