Catskill Craftsmen 51563 - Manual (Page 8)

1 3/4” Machine
Screw
Insert washers
on pins.
STEP 8
Install Doors/Bottom Front Brace
A. Take the Top Front Brace, insert the pins in the brace ends into the slots on the inside of the front
legs of the Side Panel and slide down until the brace is aligned with the set of holes in the Side Panel
as illustrated.
B. Secure brace with 1 3/4” bolts and hex nuts.
C. Install doors by inserting pins in the door tops into the holes in the top front brace.
D. Place one washer on each of the door pins in the door bottoms.
E. Take the bottom front brace, align pins in door bottoms with holes along top edge of brace (are
washers on pins??) and secure brace with 1 3/4” bolts/hex nuts as before. Bottom brace should be
flush with bottom of legs.