Catskill Craftsmen 51524 - Manual (Page 9)

STEP 10
Attach Spice Rack to Side Panel
Attach the spice rack to either side using
1” #8 screws into pilot holes in top shelf.
Place washer over screws first.
Phillips Flat Head
1” #8 Screw
STEP 11
Attach Tower Bar to Side Panel
Attach the handle/towel bar to the
other panel with 1” #8 screws and
washers from inside cabinet.
3/16” Flat Washer
2 used in
this step
2 used in this step
PHILLIPS FLAT HEAD 1” #8 SCREW
3/16” Flat Washer
2 used in
this step
2 used in this step
PHILLIPS FLAT HEAD 1” #8 SCREW
STEP 12
Install Doors/Bottom Front Brace
A. Install doors by inserting pins in the door tops
into the holes in the top front brace.
B. Place one washer on each of the
door pins in the door bottoms.
C. Take the bottom front brace, align
pins in door bottoms with holes along
top edge of brace (are washers on pins??) and
secure brace with 1 3/4” bolts/hex nuts as before.
Bottom brace should be flush with bottom of legs.
1 3/4” Phillips Flat Head Bolt
2 Used in this step
10-24 Hex Nut
2 Used
in this step
2 Used
in this step
3/16” Flat Washer
ILLUSTRATION 10
1 3/4” Phillips Flat Head Bolt
2 Used in this step
10-24 Hex Nut
2 Used
in this step
2 Used
in this step
3/16” Flat Washer
1 3/4” Phillips Flat Head Bolt
2 Used in this step
10-24 Hex Nut
2 Used
in this step
2 Used
in this step
3/16” Flat Washer
3/16” Flat Washer
2 used in
this step