Catskill Craftsmen 1582 - Manual (Page 13)

STEP 10
Invert unit or lay the unit on its back
to insert the wheels. USE A FRIEND
TO HELP WITH THIS PROCESS.
A. Insert and tap caster sockets with
hammer until the teeth grab the
wood. DON’T POUND SOCKET
FLAT OR CASTER SHAFT WILL
NOT ENTER.
B. Insert casters and seat by pushing
straight downward with heel of your
hand, or tap into place with a
hammer. Don’t be afraid to give them
a good downward whack on the solid
metal part of the caster!
C. Locking wheels usually go on
front.
STEP 11
A. Upright unit. USE A FRIEND TO HELP WITH THIS PROCESS.
B. Attach Towel Bars to the Side Panels with 1 1/4” #8 screws from inside each Side Panel.
ILLUSTRATION 11
ILLUSTRATION 10
1-1/4” Phillips Flat Head #8 Screw
4 Used in this step
1-1/4 #8 screws