beautypg.com

Step 6 – Catskill Craftsmen 1582 User Manual

Page 10

background image

4 Used

in this step

This edge faces

the front of the

cart

STEP 6

ILLUSTRATION 6

9 Used

in this step

3/8” Phillips Pan Head #6 Screw

A. Tap/insert 3/4” pin into each edge of the center divider. DON’T OVERDRIVE PINS! Pins

should stick up about 1/4” when seated.

B. Attach the magnet with the 1/2” #4 screws to the top of the panel.

C. Attach full extention glides to the center divider as shown. Note that the glides should

slide out towards the same edge with the attached magnet.

D. Tap 1” steel pins into the left side of the center divider to be used as shelf supports in a

later step.

3/4” Long 3/16” DIA. Steel Pin

3/4” Pin

Left Side View

Right Side View

4 Used

in this step

1” Long 3/16” DIA. Steel Pin

1” Pin

3/8” Phillips

Pan Head

#6 Screw

See also other documents in the category Catskill Craftsmen Furniture: