Avigilon Stentofon AlphaCom XE Integration - Manual (Page 8)

Avigilon Control Center System Integration Guide with STENTOFON AlphaCom
5
Avigilon Stentofon Gateway
The Avigilon Stentofon Gateway is composed of two parts: the Avigilon Stentofon Gateway
Windows service that runs automatically in the background, and the Avigilon Stentofon Gateway
configuration application that is used to configure the connection and alarm mappings between
the STENTOFON and the Avigilon systems.
NOTE: Whenever the Avigilon Stentofon Gateway configuration application is opened, the
Avigilon Stentofon Gateway service is stopped.
If a mapped alarm is activated while the configuration application is open, the alarm will only
appear in the application that detected the alarm.
Connecting to the Gateway
Configure the Avigilon Stentofon Gateway to access the two applications.
The Avigilon Stentofon Gateway configuration application remembers the server configuration, so
you do not need to repeat this procedure if the settings remain the same.
1. Open the Avigilon Stentofon Gateway software. Start > All Programs > Avigilon >
Stentofon Gateway > Configure Avigilon Stentofon Gateway.
2. In the Gateway dialog box, enter the AlphaCom XE Exchange IP address and port
number.
3. Click Add to add the Avigilon Server.