Avigilon Stentofon AlphaCom XE Integration - Manual (Page 10)

Avigilon Control Center System Integration Guide with STENTOFON AlphaCom
7
4. In the Alarm Mapping definition area, enter the trigger conditions that were configured
in the AlphaCom XE exchange.
Digit refers to the string used to identify the OnCustomParameter event, and Node
refers to the AlphaCom XE exchange this OnCustomParameter event is linked to. The
Parameter drop down list allows you to select the specific instance of the custom
parameter to map to.
5. Select the Avigilon Alarm the trigger will map to. All the alarms configured in Avigilon
are listed.
See Avigilon Alarm Configuration on page 3 for more information.
6. Click Ok.
The mapped alarms will now appear in the Alarm Mappings area.
7. Repeat step 3-6 until all the alarms you require are mapped.
8. Click Save.
Backing Up Mapped Alarms
After you finish mapping all the alarms in the Avigilon Stentofon Gateway, you can choose to back
up a copy of the mappings.
1. Navigate to C:\Program Files\Avigilon\Avigilon Stentofon Gateway\ .
NOTE: The filepath may be different depending on how your system is configured.
2. Copy and paste the GatewayParams.xml file to a back up location.
Restoring Mapped alarms
When you have a backup copy of the mapped alarms, you can restore the integration to use the
back up copy any time.