Avigilon ACC Server Version 4.12 - Manual (Page 41)

Using the Admin Tool
37
Figure A.
Admin Tool
If the Client software is not installed, the Admin Tool will prompt you to install it.
Starting the Avigilon Control Center Web Client
The Avigilon Control Center Web Client is a simplified version of the Client software that allows you to
monitor video from any Internet Explorer web browser.
Note: The Web Client is can only be accessed through Internet Explorer.
To access the Web Client, you need to know the IP address of the Avigilon server you want to access,
and the server's web access port number. The Network dialog box displays the web browser access port,
see
Configuring the Server Network Settings for more information.
1. To access the Web Client, open Internet Explorer and enter the following address:
http://:/ (For example, http://192.168.2.62:50083/)
If you have not accessed the Web Client before, you may be prompted to install the required
software before the Web Client will open.
2. When the login screen appears, enter your username and password for the server.
The Web Client is opened in your browser, and you can access the video and cameras stored on the
server.