Avigilon DSX Access Systems Integration - Manual (Page 7)

Avigilon Control Center System Integration Guide with DSX Access Systems
2
Installation
Server
• On one server in the WinDSX system, install the USB Software Features Key.
Client
• On each workstation that would need access to the integration, unzip a copy
of the integration file in the same directory as the DSX software.
• Install Microsoft .NET Framework 4.0 redistributable on each workstation
using the Avigilon DSX Integration.
• Install DirectX End-User Runtimes (June 2007) on each workstation using the
Avigilon DSX Integration.
The Microsoft software can be found on Microsoft.com or by contacting
Avigilon Support at
[email protected] .
Configuration
Assigning Logical IDs to Cameras
In the Avigilon Control Center Client software, assign a logical ID to each camera. The
WinDSX software will only detect cameras with a logical ID. By default, cameras do not
have a logical ID.
1. In the Avigilon Control Center Client software, right-click a camera in the
System Explorer and select
Setup.
2. In the camera Setup dialog box, click General.
3. In the General settings dialog box, enter a Logical ID for the camera.
The logical ID must be unique number.