ArtDio IPE 1000 - Manual (Page 68)

67
4.4.3 Channel Configuration
The configuration shown in this web page applies to a single channel. You must select a channel and
configure it to your particular specifications.
Web Management
Category Entry Description Data
Type Range
Channel Channel number. Displays in
Group/Port format. Port 2 in
group 1 will be shown as 1/2 RW One or two
groups and
4 ports for
each group.
Default: 1/1
I/F Type Displays the channel interface
type. RO FXS or FXO Information
Admin State Enables/disables the channel. RW Enable,
Disable