WEN 3920 16 inch scroll saw User Manual
Page 13
13
Assembly and adjustments (continued)
Adjusting the dust blower (Fig. 9)
For best results, the dust blower tube (1) should be adjusted to
direct air at both the blade and the work piece.
Sawdust collection port (Fig. 10 and 11)
This scroll saw allows a hose or vacuum accessory (not
provided) to be connected to the dust chute (1). If excessive
sawdust buildup occurs inside the base, use a wet/dry vacuum
cleaner or manually remove sawdust by removing the screws (2)
and metal plate on the left side of the saw. Reattach the metal
plate and screws before starting the saw. This will keep your
saw cutting efficiently.