WEN 3914 14 inch band saw - Manual (Page 11)

8 6 7 9
6 Base
7 Left panel
8 Right panel
9 Door assembly
10 Rear panel
11 Brace (2)
12 Shelf
Parts bag includes: Handwheel Assembly (1), WingKnob Screw (4), M6 x 16 Hex Head Bolt
(4), M6 FlatWasher (4), Push Stick Hook w/nut (1), Hex Wrench (1)and Open End Wrench (1).
Hardware bag includes: M8 Flat Washer (4), M6 x 16Hex Head Bolt (12), M6 x 16 Socket Head
Bolt (4), M6 x40 Flat Head Screw (4), M6 Flat Washer (24), M6 HexNut (8), M5 x 6 Pan Head
Screw (2) and M5 FlatWasher (2).
IMPORTANT: Table is coated with a protectant. Toensure proper fit and operation, remove
coating. Coatingis easily removed with mild solvents, such as mineralspirits, and a soft cloth.
Avoid getting solution on paint orany of the rubber or plastic parts. Solvents may
deterioratethese finishes. Use soap and water on paint, plasticor rubber components. After
cleaning, cover all exposedmetal surfaces with a light coating of oil. Paste wax isrecommended
for tabletop.
WARNING: Never use highly volatile solvents. Non-flammable solvents are
recommended to avoid possiblefire hazard.
10 11 12
11