Spectra Precision Survey Pro v4.2 GPS - Manual (Page 7)

Survey Pro GPS Quick Start Guide 5
Start GPS Survey
This function is your starting point for any RTK survey. The
Start GPS Survey wizard will guide you through all the steps
to pick a coordinate system, set up GPS equipment, solve any
required coordinate system adjustment, and begin collecting
data.
Start GPS Survey is located on the Survey menu when in
GPS mode. Also, if you attempt to start any data collection or
stake out function before you complete all the required GPS
steps, the Start GPS Survey wizard will open to guide you
through the setup.
The steps to complete GPS setup with the Start GPS Survey
wizard will depend on what has been done in a job already.
Each step is described below from the beginning of a new GPS
survey.
Start GPS Survey - Choose One Point Setup
One point setup is a special case of the Start GPS Survey
wizard. You can use one point setup any time you open a
brand new job, and you want to start a new survey with
ground level distances. Survey Pro will use Ground – TDS
Localization
mode to set a default coordinate system for
ground distances, and then automatically solve the
localization adjustment using your one job file point.
To start a job with one point setup, tap Start Survey with One
Point Setup>, and then follow the prompts to set your base
and rover GPS receivers. Upon completion of the rover setup
you are ready to collect data
If you do not wish to use one point setup, choose Start Survey
with Regular Setup> to choose a projection mode.