SnowEx SP-9500X - Manual (Page 11)

11 © TrynEx International 2013 (REV C) F50734
Operating Instructions
INVERTED-V
The SuperMAXX 9500 uses an “Inverted-V” Baffle design over
the auger area. This baffle reduces the load on the auger.The
Inverted-V should not be removed unless servicing the unit.
The Secondary Salt Baffle can be removed for spreading Sand/
Salt Mix.
Warning: Always disconnect power source before attempt-
ing to remove material baffle.
AUGER DISCHARGE TROUGH
The SuperMAXX 9500 uses an Auger Discharge Trough to reduce
material leakage. It must not be removed unless servicing the
unit.
Warning: Always disconnect power source before attempt-
ing to remove auger discharge tube.